complete hot tub systems

Roberts Hot Tubs complete hot tub systems are so complete, all you'll need to provide is the water. We include the complete hot tub, including the bench and every necessary nut, bolt and screw, as well as the required supports that the tub sits on. All of the UL listed support equipment, including an ionizer and top of the line insulating cover, is also included, along with every plumbing fitting needed to complete the installation (additional pipe may be needed if equipment is located away from the hot tub). We even provide you with a complete chemical kit, and special rubber mallet to make assembling the tub easier.

Quick FAQ

The complete systems, which come in kit form, include all of the following components:

Hot tub with full circular bench (oval tubs have two benches, one at each end).

Pentair 100K BTU gas heater (natural gas or propane, only usable to a 3500' altitude. Above 3500' heater must be upgraded.) with electronic pilotless ignition [image] (UL listed electric heaters are also available [image]).

Pentair SUPERFLO High Performance 1-1\2 H.P. 2 speed, 140 GPM 240 volt pump (UL listed) [image] [Flow Chart].

Waterways 75 sq. ft. high-flow cartridge type filter [image].

P15 ionizer for sanitizing and to reduce chemical needs [image] (UL listed).

Intermatic, Z-Wave Spa Controller, including Multi-Wave Receiver/Controller, temperature sensor and wireless Waterproof Hand Held Transceiver.

A UL listed auxiliary control for manually operating the low speed of the pump for a more gentle massage.

6" thick, tapered, folding two piece insulating cover , constructed of 1# density, metal reinforced foam, covered with a marine grade UV resistant vinyl (This is the thickest, most insulating cover in the industry, with a minimum R-value of R-21).

4 completely adjustable jets with individual air controls, 2 suction drains and enough PVC pipe, fittings and valves to complete the system.

Complete chemical kit with complete instructions.

(as we like to say, our basic system includes everything but the water)

The smaller complete systems (smaller ovals, ofuro style), which come in kit form, includes the following UL listed components:

Hot tub with 1 or 2 benches (when applicable - ofuros generally don't have a bench).

Hydro Quip Spa Pack, including 2 speed pump and your choice of, 5.5kW or 11kW heater, air button or digital spa side controls, indoor or outdoor rated.
Waterways, 50 sq. ft. high-flow cartridge filter. [image]

Your choice of either a 6" thick, tapered, folding two piece insulating cover , constructed of 1# density, metal reinforced foam, covered with a marine grade UV resistant vinyl (This is the thickest, most insulating cover in the industry, with a minimum R-value of R-21), or a matching Roll Cover.

2 jets with individual air controls, 2 suction drains and enough PVC pipe, fittings and valves to complete the system.

Complete chemical kit with complete instructions.

Upgrades

The most common upgrade requested is a larger heater, followed by lighting and for those living in freezing climates we recommend the addition of a freeze control which will monitor the temperature of the water in the piping and turn on the pump when the temperature drops below a preset level. There's also the availability of additional pumps and jets, air blower, and for the connoisseur solid bronze jets

In addition to the upgrades, we also offer a complete line of wooden accessories These accessories include the Hot Tub Shelf, the Complete Rim Shelf, a Rim Deck and steps

The system can also be downgraded for a more economical price, e.g. smaller heater, fewer jets or omission of the ionizer.

The price list includes many different options, others may also be available. Please call with any questions.

The Complete Hot Tub System