 |
Slide ValveThese slide valves take either 1-1/2" PVC pipe on the inside, or 2" PVC fittings on the outside |
Specialty Hot Tub
& Spa
|
There's quite a few different hot tub and spa specialty plumbing fittings. If by chance you don't find the correct part for your spa or hot tub, please don't hesitate to Contact Us. If you're looking for something completely different please start at the Store Directory.
|
Slide ValveThese slide valves take either 1-1/2" PVC pipe on the inside, or 2" PVC fittings on the outside |
1-1/2" Ball ValveThis 1-1/2" ball valve can be disassembled for servicing and repairing. |
 |
 |
Spring Check ValveThese 1/4 Lb. spring check valves take either 1-1/2" PVC pipe on the inside, or 2" PVC fittings on the outside |
25A Flo SwitchThis adjustable flo switch is rated at 25 amps and takes 1-1/2" PVC. |
 |
 |
Low Voltage Flo SwitchThis adjustable flo switch is rated for low voltage only and takes 1-1/2" PVC. |
Hydro Air Air DialThese air dials accept your choice of 1/2" or 1" PVC, and come in a choice of colors.
|
 |
 |
1 1/2" pvc unionThis 1-1/2" PVC union is perfect for installing equipment that may later need to be remonved. It's also just the right size for attaching to pumps that accept a union for piping attachment. |
Wooden Hot Tub Suction FittingThese brown suction fittings are long enough to accommodate the thickness of a wooden hot tub.
|
 |
 |
Wooden Hot Tub Complete V-JetThese are same jets we use on our traditional wooden hot tubs. The wall fitting (the part that goes through the side of the hot tub) is white in color, 2-1/2" long and 2-3/8" in diameter (requires a 2-1/2" hole). This jet is rather unique in that it has a directional nozzle to adjust the direction of water flow AND by twisting the nozzle the amount of water flowing from it can be adjusted. . The jet body (outer part) accommodates 1-1/2" PVC for water, and 1/2" PVC for the venturi air intake. |
Wooden Hot Tub Complete JetThese are the only other full size jets long enough to accommodate the thickness of a wooden hot tub. The wall fitting (the part that goes through the side of the hot tub) is brown in color, 2-1/2" long and 2-3/8" in diameter (requires a 2-1/2" hole). The face has an eyeball that can be swiveled to adjust the direction of water flow. The jet body is clear, and accommodates 1-1/2" PVC for water, and your choice of 1-1/2" OR 1/2" PVC for the venturi air intake. |
 Additional Image |
Flexable PVCFlexable PVC available by the foot in your choice of size. Perfect for the plumbing around a spa and doing small repairs where rigid PVC will be dificult to work with. The size indicated is the ID, please indicate the feet wanted in the quantity box |
){kind=link}