Ozonators for
Hot Tubs and Spas

JED 203

The JED 203 is designed for water purification in residential and commercial hot tubs, small pools, fountains, cisterns and water tanks up to 5000 gallons. The JED 203 is supplied in a plastic rainproof enclosure that can be wall mounted outdoors. The JED 203 has its own air compressor which can pump ozone into a pool, tub or tank up to 24 hours a day independently of water circulation. The JED 203 is typically installed in conjunction with an over the side kit or thru-hull fitting.

-Specifications-

• Dimensions: 9 1/2" x 8 1/2" x 4 1/2"
• Input Voltage: 120 VAC, 60 Hz
• Operating Current: 0.42 Amperes
• Ozone Output: 0.1Grams per Hour
• Power Consumption: 50 Watts

Spa King Bubble Gun II

The Bubble Gun II is the lowest cost of all Spa King models, and is designed for use in spas up to 500 gallons. It is typically mounted under the skirt of a spa and needs to be electrically activated when the spa pump turns on. Ozone is injected into the spa through a jets air line or may require an additional bypass injector. If your spa is not ozone ready but uses a one speed pump a qualified electrician can wire the ozonator to the electrical supply of the pump for proper operation.If your spa uses a two speed pump a flow switch can be installed by a qualified technician to assure the ozonator's operation only when the pump is running. Please choose the required plug style (see below).

Spa Ozone Detection

60% - 90% of all spa ozonators in use today have expired and cease to create ozone. Typically there's no indication anything is wrong as visually they appear to still be working. This revolutionary ozone detection kit is a simple 30 test to check that your ozonator is still operating effectively and producing adequate levels of ozone. Without an efficiently operating ozone generator, water quality & sanitation diminishes, meaning a greater requirement for chemical sanitizers.