Hot Tub
|
For extensive information on our hot tubs please click here, or for information on our complete hot tub systems click here. Ordering from this page, is as simple as clicking the the price button. If by chance you don't see what you're looking for, please don't hesitate to call or Contact Us. If you're looking for something completely different please start at the Store Directory.
Pentair MasterTempOur 'complete hot tub systems' include a 100k BTU heater. Upgrading to a larger heater allows for a bit more spontaneous use of your hot tub. The MasterTemp is our best recommendation. Starting at 200k BTU's and increasing in increments of 100k it's low profile (28" tall) and compact design will fit any installation (up to altitudes of 8k'). The MasterTemp is also equipped with a power venting system for simplifying indoor installations. FEATURES:
|
|
Freeze (Air Temperature) Sensor
|
USB Controller
Software to operate the USB Controller, and Updates are available form the manufacturers website. |
35-ft. Antenna Extension Cable
-- |
Secondary Wireless Hand-Held Transceiver
The Hand Held Transceiver floats if thrown into the hot tub, is water-submersible and shock resistant (requires three (3) AA batteries). Expected battery life is approximately one year in typical use. Up to five Hand Held Transceivers can be used in a single installation. |
Z-Wave Wall Switch
The basic Z-Wave Wall Switch can be added into the control system and becomes operable from the Hand Held Transceiver. Perfect for turning on and off outdoor lighting, while sitting in your hot tub. Also available are dimmers and three-way switches. |
Z-Wave Receptacle The Wall Receptacle replaces a standard 15 Amp receptacle in your home and offers one outlet controlled by the Hand Held Transceiver and one live outlet. This is a great way to integrate the technology directly into a wall plug without an unsightly appliance module sticking out of the wall. -- |
Adding a second pump with 4 additional jets will increase your jet massage therapy. The "Jet Upgrade Kit" includes a 1 horse power pump, 4 adjustable jets with air controls, and the necessary plumbing needed (PVC piping and fittings).
An air bubbler system will virtually double the therapeutic benefits of a hot tub. The bubbler system consists of an air blower that pumps air through a 'ring' of pipe located beneath the hot tub's bench. Many numerous, small holes in this pipe allow the air to escape into the tub giving it a "bubbling cauldron" effect.
The bubbler system includes a 1-1/2 hp 240v air blower, and the necessary plumbing to complete installation (PVC piping and fittings).
Illumination This low voltage lighting system is specifically designed for wooden hot tubs and comes with five lenses in an array of colors. Available with a single light, or with two lights for additional illumination. Also available with a bronze thru-wall lens fitting (see below). |
 |
 |
Hot Tub Shelf The Hot Tub Shelf provides a perfect place to set drinks and towels and such. Each 10" wide shelf section surrounds 1/6 of the circumference of a 4' diameter hot tub, 1/7 of a 5' tub, or 1/8 of a 6' hot tub. More than one "shelf" can be added to give additional space.. |
||||
|
|
|||||
Complete Rim Shelf An expanded version of the Tub Shelf, the Rim-Shelf is a complete circular, 10" wide shelf. A great place to set towels, cups or to sit. A Rim-Shelf is also perfect for hiding the plumbing on free-standing tubs that aren't incorporated into a deck. Please note, The Rim-Shelf is designed for light duty only (no walking on it). |
 |
||||
|
|
|||||
 |
Rim Deck The Rim-Deck is 14" wide and has additional supports to carry a full load. Not only does it give a wider area than the Rim Shelf, it can also be walked on. The individual sections can be mounted all at one height, or as pictured, at multiple levels to create steps for easy hot tub entry. |
||||
|
|
|||||
Triple Steps A free standing hot tub can be rather difficult to climb into. These 25" tall redwood steps make climbing into a hot tub a breeze. |
 |
||||
|
|
|||||
Please note, these steps are preassembled and too large to ship via UPS. If ordered individually, additional shipping charges will apply.
 |
Bronze Jets Our exclusive powder coated, solid bronze jet fittings and suctions not only maintain their shine, but will never crack or leak. These are also available for the above light. |
Stainless Steel Bands These stainless steel bands are perfect for salty environments or when you want the beautiful shine they produce. Included with the bands are stainless steel nuts and double powder coated matching lugs. |
 |
Freeze Protection
|
Store Directory , Redwood & Cedar Hot Tubs , Teak Hot Tubs , Oval Hot Tubs
In areas of freezing temperatures this Freeze Sensor is a necessity. The sensor
is designed to protect the equipment and plumbing against freeze damage. Simply plug it
into the circuit board on the Multi-Wave Receiver and add it with the Wireless Hand-Held
Transceiver.
The USB Controller allows for access to the entire Z-Wave network using a PC. The
USB Controller, when paired with a variety of applications software can give entire system
control, with remote access through the Internet. It's also necessary if you desire to
install periodic upgrades to the programming of the Z-Wave Spa Control System for
increased functionality.
When a structure impedes transmission between the Hand Held Transceiver and Multi-Wave
Receiver, you can use the 35-ft. Antenna Extension Cable Assembly to relocate the antenna
from the Multi-Wave Receiver to the area of operation, ensuring that communication between
the Hand-Held unit and the control center is successful.
The Z-Wave Control system includes one Wireless Hand Held Transceiver,
which is the focal point of convenience,
transmitting user commands to the Multi-Wave Receiver and displaying the
status of the equipment, water temperature, thermostat set point, heating status, time
clock settings and overall communication status. Adding a secondary Hand Held Transceiver
can add convenience.