|pH Balance will prevent pH "drift" for up to 3 months. Simply add to freshly filled spa and it will automatically set pH between 7.2 - 7.8 DO NOT USE IN HARD WATER AREAS--pH Balance should not be used if wate hardness is 150 parts per million or greater, percipitated calcium resulting in cloudy water and/or clogged filters is possible. 32 oz. Bottle|
pH Balance is a unique pH balancer that maintains the ideal pH level between 7.2 and 7.8.
Apply pH BALANCE to freshly filled spa after pH & total alkalinity levels have been adjusted. Will maintain ideal pH and total alkalinity levels for up to 3 months.
Prevents pH drift. Eliminates need to adjust pH on ongoing basis. Last up to 3 months
1. Adjust pH and total alkalinity of freshly filled spa to proper levels (pH level: 7.2 - 7.8 ppm and total alkalinity level: 80-120 ppm).
2. Add entire contents of quart (32 oz.) bottle to filled spa while the filter is running.
3. pH will instantly lower or raise the pH to a reading between the ideal range of 7.2 to 7.8.
Bromine, chlorine, ozone, and mineral purifications systems.
Caution! pH BALANCE should not be used in hard water areas where calcium reading is above 150 ppm. In these conditions, this formula will soften hard water and release calcium into spa water possibly causing cloudy water, scaling and clogging of spa filter.
If you are not in a hard water area, but experience clouding of spa water after applying pH BALANCE, Leisure Time recommends using SPA BRIGHT & CLEAR to return clarity to water.
(Material Safety Data Sheet)