| Page 1 |
M A T E R I A L S A F E T Y D A T A S H E E T
Page 1 of 4
23574 Spa Defender New
1. Product And Company Identification
Supplier
Manufacturer
Advantis Technologies Inc.
Advantis Technologies Inc.
1400 Bluegrass Lakes Parkway
1400 Bluegrass Lakes Parkway
Alpharetta, GA 30004 United States
Alpharetta, GA 30004 United States
Telephone Number:
(770) 521-5999
Telephone Number:
(770) 521-5999
FAX Number:
(770) 521-5959
FAX Number:
(770) 521-5959
Web Site:
www.poolspacare.com
Web Site:
www.poolspacare.com
Supplier Emergency Contacts & Phone Number
Manufacturer Emergency Contacts & Phone Number
CHEMTREC - DAY OR NIGHT: (800) 424-9300
CHEMTREC - DAY OR NIGHT: (800) 424-9300
Issue Date:
06/11/2001
Product Name:
23574 Spa Defender New
Chemical Name:
Polyacrylamide
CAS Number:
Not Established
Chemical Family:
Anionic Polymer
Chemical Formula:
Proprietary Mixture
MSDS Number:
130
2. Composition/Information On Ingredients
Ingredient
CAS
Percent Of
Name
Number
Total Weight
CITRIC ACID
77-92-9
Ingredients listed in this section have been determined to be hazardous as defined in 29CFR 1910.1200. Materials
determined to be health hazards are listed if they comprise 1% or more of the composition. Materials identified as
carcinogens are listed if they comprise 0.1% or more of the composition. Information on proprietary materials is available in
29CFR 1910.1200(i)(1).
3. Hazards Identification
Primary Routes(s) Of Entry
Skin Contact, Eye Contact
Eye Hazards
Causes eye irritation which may lead to blindness.
Skin Hazards
Causes skin irritation.
Ingestion Hazards
If ingested, get immediate medical attention.
Inhalation Hazards
May causes respiratory tract irritation.
Signs And Symptoms
Irritation of Eyes, Skin and Respiratory Passages
M A T E R I A L S A F E T Y D A T A S H E E T
Page 2 of 4
23574 Spa Defender New
First Aid (Pictograms)
4. First Aid Measures
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of water for at least 15 minutes.
Call a physician or a poison control center immediately.
Skin
Wash the affected area under tepid running water using a mild soap. Remove contaminated clothing and shoes.
Ingestion
If victim is fully conscious, give one or two cups of water or milk to drink. Get medical attention immediately.
Inhalation
If breathing is difficult, give oxygen. If inhaled, remove to fresh air. Consult a physician.
Fire Fighting (Pictograms)
5. Fire Fighting Measures
Flash Point:
n/a °F
Flammability Class:
n/a
Fire And Explosion Hazards
Spills of this material are very slippery. The area should be flushed with water.
Extinguishing Media
Use the appropriate extinguishing media for the surrounding fire.
Fire Fighting Instructions
Firefighters should wear self-contained breathing apparatus and full protective gear.
6. Accidental Release Measures
SPILLS OF THIS MATERIAL ARE VERY SLIPPERY. Clean up spill immediately. Contain and/or absorb spill with inert
material (e.g. sand, vermiculite). Flush spill area with water to remove residue and apply additional dry sweeping
compound. Use appropriate containers to avoid environmental contamination.
7. Handling And Storage
Handling And Storage Precautions
Keep out of reach of children. Store material in a cool and dry place.
Handling Precautions
Do not get in eyes.
Storage Precautions
Keep out of reach of children. Store in a cool dry place. Avoid contact with Oxidizing agents.
Work/Hygienic Practices
Use safe chemical handling procedures suitable for the hazards presended by this material.
Spills of this material are very slippery.
M A T E R I A L S A F E T Y D A T A S H E E T
Page 3 of 4
23574 Spa Defender New
Protective Clothing (Pictograms)
8. Exposure Controls/Personal Protection
Engineering Controls
Local exhaust acceptable. Special exhaust not required
Eye/Face Protection
safety glasses or goggles.
Skin Protection
Chemical-resistant gloves.
Respiratory Protection
None normally required.
9. Physical And Chemical Properties
Appearance
Clear green liquid
Odor
Mild
Chemical Type:
Mixture
Physical State:
Liquid
Melting Point:
n/a °F
Boiling Point:
212 °F
Specific Gravity:
1.0-1.1
Percent Volitales:
95%
Vapor Pressure:
Not Determined
Vapor Density:
>1
pH Factor:
6-8
S o l u b i l i t y :
Miscible in water
V i s c o s i t y :
Not Determined
Evaporation Rate:
<1
10. Stability And Reactivity
S t a b i l i t y :
Stable
Hazardous Polymerization:
Will not occur
Conditions To Avoid (Stability)
Avoid contact with strong Strong Oxidizing agents
Incompatible Materials
Strong Oxidizing Agents
Hazardous Decomposition Products
Oxides of Nitrogen and Carbon or sulfur oxides and/or hydrogen chloride gas
11. Toxicological Information
No Data Available...
M A T E R I A L S A F E T Y D A T A S H E E T
Page 4 of 4
23574 Spa Defender New
12. Ecological Information
No Data Available...
13. Disposal Considerations
Refer to applicable local, state and federal regulations as well as industry standards.
14. Transport Information
Proper Shipping Name