Covermate Spa Cover
Lift Repair / Replacement Parts
|
| Some replacement parts for the Cover Mate spa cover lifts are designated left or
right. Orientation is such so that when standing in front of the spa, with the cover
opening away from you, the side to your left is also the left side of the cover lifter.
Please note that the older style tubing had a smooth finish and the cover lifter replacement parts below, which
will still work in combination with the old finish, are all of the newer style, slightly
textured finish. If you're looking for something completely different please start at the Store Directory. |
 |
TowelMate Towel Hook
 |
Replace one that broke, or add more hooks for even more convenience. Will
fit any Covermate cover lifter (does not include attachment screw).
|
Pivot Arm Spacer
Pivot Arm Spacers are used on the Covermate 1, 2 and 3. Over the years, there have been two different designs, that
can be differentiated by the width of the flat spot where the two pieces meet (see the image below). Pivot Arm Spacers
come as a set of two.
Pivot Arm Spacer (old style)
$9.95
|
Pivot Arm Spacer (new style)
$9.95
|
Covermate 1 | Covermate
2 | Covermate 3 | Covermate Easy
We're still developing this page and adding additional parts. If the part you need isn't listed, please
Contact Us.
Standard Bracket
 |
The original old style metal bracket (above) has been discontinued and replaced
with the plastic bracket shown to the left. If one metal bracket needs to be replaced,
both should be replaced with the new style bracket.
|
 |
Specialized Sundance Mounting Bracket Set
Contains both the left and right mounting bracket, as shown to the left, and a complete screw kit.
|
Extended Bracket
Left extended bracket
|
Right extended bracket
|
|
|
Side Pivot Arm
Coupler
There are two couplers, the standard and the extended. The standard coupler is for
covers up to 8' wide and measures 43" long. The extended coupler is for covers over
8' wide and measuers 55" long. The extended coupler can also be used for the Covermate 3.
Standard Covermate 1 Coupler
$29.95
|
Extended Covermate 1 Coupler
$39.95
|
Covermate 1 Cover Support Arm
Foam Grip
|
This is the foam piece on the upper support arm one holds to lift the cover.
|
Hardware Package
 |
The hardware package contains every nut, bolt, washer, screw and screw
cap necessary to assemble and install the Covermate 1 or 2.
Contains
- 25, #10 x 1" screws
- 2, 3" x 3/8" bolts
- 2 bold caps
- 4, washers
- 2, 3/8" lock nuts
- 12, #10 self tapping screws
- 40 screw caps
|
Covermate 2 Standard Bracket
|
The original old style metal bracket (above) has been discontinued and replaced
with the plastic bracket shown to the left. If one metal bracket needs to be replaced,
both should be replaced with the new style bracket.
|
|
|
Covermate 2 Undermount Bracket Kit
|
SEE
IMAGE
ABOVE |
Covermate 2 Side Pivot Arm
|
SEE
IMAGE
ABOVE |
Covermate 2 Upper Support Arm
|
SEE
IMAGE
ABOVE |
Covermate 2 Lower Support Arm
|
SEE
IMAGE
ABOVE |
Covermate 2 Coupler
|
Foam Grip
|
This is the foam piece on the upper support arm one holds to lift the cover.
|
Hardware Package
|
The hardware package contains every nut, bolt, washer, screw and screw
cap necessary to assemble and install the Covermate 1 or 2.
Contains
- 25, #10 x 1" screws
- 2, 3" x 3/8" bolts
- 2 bold caps
- 4, washers
- 2, 3/8" lock nuts
- 12, #10 self tapping screws
- 40 screw caps
|
 |
Side Pivot Arm
Over the years there have been three different styles of Covermate 3's, that can be identified by
the material the mounting brackets are made of. Steel, aluminum or plastic.
There's currently only one type, or "style" of side pivot arm available. It's a universal pivot arm
that will work for either the windlock, or non-windlock side. It will work with Covermate 3's having
either the aluminum or plastic mounting brackets. It will NOT work with the older steel brackets. The length of
the standard Side Pivot Arm is 31-1/4". An extended Pivot Arm, 38-1/4" is also available.
|
 |
Shock
Please note: This shock will ONLY fit the Covermate 3. While the shocks for cover lifters
all "look" the same, different lifters use different shocks, all with different specifications. If you do not have a Covermate
3, this shock will not fit.
|
 |
Left Cover Support Arm
The image to the left shows the left cover
support arm laying on it's back with the "hook" pointing upwards
|
 |
Right Cover Support Arm
The image to the left shows the right cover support arm
laying on it's back with the "hook" pointing upwards
|
 |
Side Mount Bracket Kit
This complete side mount bracket kit (sorry, individual brackets are not available) includes both the left and right
bracket, and the complete mounting hardware kit. These are the newer style plastic mounting brackets (sorry, the old
style, metal brackets, are no longer available).
|
 |
 |
Deck Mount Bracket Kit
This complete deck mount bracket kit (sorry, individual brackets are not available) includes both the left and right
bracket, and the complete mounting hardware kit. These are the newer style plastic mounting brackets (sorry, the old
style, metal brackets, are no longer available).
|
 |
 |
Hardware Kit
|
SEE
IMAGE
ABOVE |
Covermate Easy Upper Support Arm
|
Foam Grip
|
This is the foam piece on the upper support arm one holds to lift the cover.
|
|
Mounting Bracket Kit
Contains two Mounting Brackets, Catch Strap, and all necessary hardware to install.
|
Store Directory
, Parts Index
Store Directory | Home Page
