Spa Cover Lift by Coverplay Inc.

Engineered for either spa side or deck mount, the advanced-design of the COVER UP! utilizes "forward fulcrum" to assist in lifting your spa cover on and off your spa. This advanced design, along with exacting tolerances, allows for the easiest of installations on the widest variety of spas.

The most significant, aspect of the COVER UP! is the "VersaMount", a universal deck/cabinet mounting bracket. The VersaMount is fitted with small, powerful torsion springs to assist the cover on and off the spa. With this Torsion Spring System, the COVER-UP! is less reliant on safety cables for slowing the momentum of the cover, thereby averting careless cabinet damage, or cable failure. With this Torsion Spring System, putting the cover back on the spa can be done with only one finger and shock loads to the cabinet imposed by "less than careful" cover removal are reduced. This helps protect both cover and the spa. This unique and versatile mounting system accommodates virtually any spa up to 8 feet wide.

This strong mounting bracket is versatile enough to be attached to the side of the spa cabinet or fastened to the deck, to allow for a wider range of spa shapes and sizes. If attaching the mounting brackets to the side of the spa or deck is not practical, an optional Mounting Plate can be used. This T-6 Aluminum mounting plate slides under the spa and the cover lift is attached to it. This versatile mounting system works with most most spa applications up to 8 feet wide.

Coverplay, Inc. brings over 15 years of engineering creativity to the cover lift industry.

Our COVER-UP! lift was the first cover lift to introduce a universal lifter mount, the VersaMount. This versatile mounting system allows the lift to be mounted to the spa cabinet or the deck.

Our newest product, the COVER-PRO lift, integrates to the cover and saves up to 40% in energy costs.

Our cover lifts are built with advanced engineering and quality craftsmanship.

Easy Cover Removal
Convenient Safe Storage
Extends Cover Life
Beautiful and Long Lasting Powder Coating
Cabinet or Deck Mounting

Showcasing some of the technological aspects of the Cover Up spa cover lifter.
Forward Fulcrum: This patented design increases the travel over lift ratio, allowing the cover a lower position of storage during spa use, reducing risk from gusting winds and reckless play.		Narrow Continuous Tubing: Research proves larger tubing causes undue stress to the cover joint seam. Our continuous span design evenly distributes the weight of the cover over the entire length of the cover joint.
VersaMount: Our mounting brackets are superior for their size and weight. The brackets are made from ductile cast iron with no sharp edges. The VersaMount also provides deck and cabinet mount versatility.		Torsion Spring System: Our "Halo" springs provide assitance during the transition of cover movement and reduce shock loads to the cabinet. This assistance can be enhanced by securing the spring to assist lift in *both directions*
Quality Built Built with quality in mind, all tubing is .083 wall thickness aluminum (twice as thick as others), brackets are ductile cast iron with no sharp edges, and all stainless steel hardware is included All components are powdered coated with UV protection prismatic powder for extended life.		UV Protected Safety Cables: Durable, saftey cables are looped, and feature thimbled, swivel post mounting brackets to eliminate kinks. Tested to an incredible 450 lbs. each, they are superior in design, utilizing maximum mechanical advantage.

The COVER-UP! spa lift works by allowing you to safely lift and store the spa cover. By helping with the lift, this allows for one person to lift the cover without risk of back injury. The cover is also stored off the ground which will keep your cover looking new and last longer.

Step 1 Unlock the spa cover straps, lift the front half of the cover and fold the spa cover over the COVER-UP spreader bar and horizontal bars.	Step 2 Grasp the cover handles at the rear of the spa and pull gently until the cover is in the vertical position, or step into the spa and push gently while lifting the cover to guide it into the vertical resting position for storing.	Step 3 Relax in your spa. That's all there is to it! You cover is now easily removed and safely stored.
To recover, stand up in your spa and gently pull the cover toward you as you step back to exit the spa. Step out of the spa, close the cover, and relock cover straps for saftey.

Installation / Operating requirements and limitations
rear clearance	side clearance	spa/cabinet shape limitations	mounting location	spa corner shape limitations	type of lift assistance	min. [max.]cover width
18"	5"	none	deck or spa side	none	spring assist
See the complete Cover Lift Configurater to compare all cover lifters side by side.

The Cover-Up

Protect your spa cover and your back with the innovative Cover Up spa cover lift!

Showcasing some of the technological aspects of the Cover Up spa cover lifter.

Cover-Up Picture Gallery
(click to enlarge)

The Cover-Up

Protect your spa cover and your back with the innovative Cover Up spa cover lift!

Showcasing some of the technological aspects of the Cover Up spa cover lifter.

Cover-Up Picture Gallery (click to enlarge)

Cover-Up Picture Gallery
(click to enlarge)