 |
Covermate I |
|
 |
The unique design of the Covermate I allows the spa cover
to be easily removed and stored in the open position. The spa cover stands approximately
half way above the spa lip, while requiring as little as 10 " clearance behind the
spa. |
| With Covermate I, removing the spa cover from the inside or outside
of the spa requires very little strength or effort. The Covermate I is designed to
not flex or torque when being operated from outside the spa. |
 |
 |
The Covermate I's 12 point, 14" mounting system provides
extreme strength. |
| Remove that bulky spa cover effortlessly. The CoverMate I
handles spa covers with ease! The placement location of the supporting brackets allow you
to "park" the lid in the open position to provide a wind or privacy screen.
Requires a 12" clearance behind the spa. Will accomodate covers up to 96". |
 |
| In addition to the standard CoverMate1,
there are two specialty versions for specific spa brands. One for Sundance/Sweetwater Spas and
another for Arctic Spas. These two variations are designed to accomodate the unique wood
skirting of these brands of spas.
There's also the Wide CoverMate1 for
covers over 8' in width (up to 8½"), and the Extended CoverMate1 for
spas with radius corners over 10" or cut corners over 14". |
READ THE INSTALLATION
INSTRUCTIONS
 |
Installed on a Bullfrog brand spa, these pictrues show the Covermate 1 with the special
"extended mounting brackets" for spas with rounded corners that are a radius over 10". |
 |
 |
Shown here is the specialized mounting bracket, specific to Sundance/Sweetwater brand spas. This particular style
is designed to accommodate the unique style of both their synthetic and wood cabinets. |
Installation / Operating
requirements and limitations |
| rear clearance |
side clearance |
spa/cabinet shape limitations |
mounting location |
spa corner shape limitations |
type of lift assistance |
min. [max.]cover width |
| 12" for least obstructed view. 10" min. |
4" |
not for round skirted spas |
side only |
requires "extended bracket" if radiused corners over
10" or cut corners over 14" |
fulcrum |
72" (60" if trimed) [96"] |
See the complete Cover Lift Configurater
to compare all cover lifters side by side. |
Covermate 1 Picture Gallery
(click to enlarge)
Please see the on-line store
for pricing and ordering.
Cover Lifter Index
Cover Lift Configurater
| Cover Lifter Picture Gallery
CoverMate I
, CoverMate II
, CoverMate III
, CoverMate Easy
, CoverMate Freestyle
, Cover Shelf
, Cover Catch
Cover-Up
, Cover Valet
, Cover Caddy
, Cover Genie
, Rock-It
, Ideal Lift
, Cover Keeper
, EZ-Lifter
, Superlift 2
Home Page
, Hot Tub and Spa Covers
Virtual Store
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)