Other Usefull Pages
[ BBS FAQ ] [ Error Codes ] [ Chlorine Info ] [ Bromine Info ] [ TDS ] [ pH Explained ] [ Electric Heater Guide ] [ Voltage Testing ] [ Pump Air Lock ] [ Owners Manuals ]

Ask 'Dr. Spa' Q & A Message Board




Ask 'Dr. Spa' Q & A Message Board archives

Balboa Fault Code FIL2

We get this code (FIL2) when pressing temperature setting up or down arrows, then pump 1 for fast or slow speed. Message stays for possibly 30 seconds or so, then indicates temperature. The I could be a 1, don't know for sure. Does anyone know what the code means?

First noticed the water temperature is 100, but the setting is 95. Pump stayed on slow speed, as it does when the heater is on. While pressing temp setting buttons and pump speed buttons, noticed the code and button sequence to get it.

We recently had a valve replaced on the suction of pump 2. Spa was drained and refilled to do the work. The disconnect breaker was opened prior to draining and closed after refilling with water. The code above appeared 2 days after the work was completed.

Messages In This Thread


Home Page , Wooden Hot Tubs , Japanese Ofuros , Hot Tub & Spa Covers
Info & Help , Hot Tub FAQ , Hot Tub Picture Gallery , Virtual Store

PLEASE NOTE: We are Roberts Hot Tubs Inc. (manufacturers of traditional wooden hot tubs)! If you found this webpage through a search engine while searching for a different brand of spa, we are not them! We simply appeared in your search due to that name being talked about on this particular web page. The phone number below will reach Roberts Hot Tubs, not the manufacturer of the brand of spa you're searching for. This is a public forum and you're more than welcome to post a question asking for contact or other information for a particular brand of spa. Almost certainly someone will be able to assist you.

(510) 234-7920

Register with our confidential mailing
list to receive notices of updates, special
offers and free information.

E-Mail address: 
subscribe unsubscribe