| Other Usefull Pages [ BBS FAQ ] [ Error Codes ] [ Chlorine Info ] [ Bromine Info ] [ TDS ] [ pH Explained ] [ Electric Heater Guide ] [ Voltage Testing ] [ Pump Air Lock ] [ Owners Manuals ] |
Sounds like the board is bad. This may have been caused by a ground faulted heater, so be sure to have that checked as well. You don't want to spend big bucks on a board, just to have it also burn up.
John
: Hi! Have a burn out problem I think. Spa works fine untill the heater
: light comes on- then the whole thing pops the breaker. So I opened it
: up, found a burned red (I believe) wire and a burnt little coiled up
: wire square shaped thing with what was once yellow plastic wrapped
: around it. I assume it's burnt because all the other ones are still
: bright yellow. I think there may be 5 all together on the board. I
: just wanted to know if that can be removed and a new one sautered on,
: or if the whole board is going to have to be replaced. I had turned
: the tub up to 104F that day,that's as high as mine goes, all other
: days it was on 100F. Could that be what did it? It's a Coleman brand.
: Thanks in Advance!
|
Home Page
, Wooden Hot Tubs
, Japanese Ofuros
, Hot Tub & Spa Covers PLEASE NOTE: We are Roberts Hot Tubs Inc. (manufacturers of traditional wooden hot tubs)! If you found this webpage through a search engine while searching for a different brand of spa, we are not them! We simply appeared in your search due to that name being talked about on this particular web page. The phone number below will reach Roberts Hot Tubs, not the manufacturer of the brand of spa you're searching for. This is a public forum and you're more than welcome to post a question asking for contact or other information for a particular brand of spa. Almost certainly someone will be able to assist you. |
|
|