|Other Usefull Pages
[ BBS FAQ ] [ Error Codes ] [ Chlorine Info ] [ Bromine Info ] [ TDS ] [ pH Explained ] [ Electric Heater Guide ] [ Voltage Testing ] [ Pump Air Lock ] [ Owners Manuals ]
: I have a Softub T140 with P24 pack, made about 1999-2000. I bought it
: new, it has never had service and has been kept very clean and used
: little. I believe that when new, the air control worked fine (lots of
: Recently I noticed that the air control stopped working. It seems to
: have a slight air leak all of the time, but only VERY few bubbles
: when the air control is open.
: Maybe the problem started when I reskinned the tub, and replaced to jets
: with the new style Softub jet, which I do not care for. The new jets
: have more parts and are more complex. The old jets worked fine, but
: are discolored or bleached with time and use.
: The new jets do not seem to fight tightly. Even when screwed down tight,
: they can be wiggled slightly. I think it is possible that the
: looseness is interfering with the operation of the bubbler. The pump
: seems to be fine with normal water flow. The passages are clear - I
: can spray water through them fine.
: Any input? Any experience with installing the new jets?
: Thanks for input!
I doubt it's the jets. Disconnect the air hose between the pack and the tub while the jet pump is running and see if that results in plenty of air.
PLEASE NOTE: We are Roberts Hot Tubs Inc. (manufacturers of traditional wooden hot tubs)! If you found this webpage through a search engine while searching for a different brand of spa, we are not them! We simply appeared in your search due to that name being talked about on this particular web page. The phone number below will reach Roberts Hot Tubs, not the manufacturer of the brand of spa you're searching for. This is a public forum and you're more than welcome to post a question asking for contact or other information for a particular brand of spa. Almost certainly someone will be able to assist you.