Ask 'Dr. Spa' Q & A Message Board

Hi Austin,

I notice those "I've been everywhere and know everything about Softubs" guys didnt get back to us hey

Okay so lets start with the temperature thing because thats the easiest.

The two temperature probes (They do different things but foir the moment lets stick to what we are looking to do here) are located in the top outlet pipe of the hydromate. So, this is very simple... the water has to pass through the 2 hoses (in and out of the Hydromate) and the waters temperature is taken from the top hose... so... if these hoses were exposed to the elements, i.e. the air, or snow, it's only a small body of water... without the foam collar protection between the Hydromate and the Softub the temperture will drop in the top hose faster, and then, the pump will start again, heating the water until it takes another reading. You just leave the small leathertex cover on and take away the foam collar. Like I said... simple really

Okay the 24 hour timer.

This has the spa come twice a day. If you set the spa at 7.00am, it will come on at 7.00am and 7.00pm.... same if you set it at 9.27am... it will come on at 9.27 pm and 9.27am every day.

Okay how we do this...

We hold down two buttons on the control panel... the "+" button and the "light" button... you hold both down for about 15 seconds from memory... then a "24h" will flash up on your control panel. Give that a shot and you'll see what I mean.

Russ.

: Hey Russ,

: what 2 buttons do i push together to set the 24 hour timer up. I am
: having the same problem. I put my softub on a timer and when it shuts
: off and comes back on, it resets to 100 degrees.

: Also, you said there is a little trick to make it a little hotter? whats
: that.

: Thanks for the info. I am really enjoying this softub.

: Austin