Ask 'Dr. Spa' Q & A Message Board

: Mark,

: if your still looking replace the system you are using with a timer
: there is a feature on the Softub that is not in the manual...

: there is a feature called 24 hour timer mode. By holding down two
: buttons on the control panel simutaneously for a set period of time
: your spa will only come one twice a day. if you set the timer at
: 6.00pm, it will come on at 6.00am and 6.00pm, Once to filter and once
: to heat. The filter cycle will run for the normal 20 minutes... but
: the heat cycle will come on and stay on till the spa gets to the
: desired temperature.

: Also if you need the heat to be up slightly on the top temperature let
: me know and I will tell you a little trick that slightly increases
: the temperature.

: If the above is what you are looking to do, let me know and I will tell
: you the two buttons and how long for. If not... sorry to get involved
: in your conversation... it's just the information you receuived wasnt
: correct and I wanted you to be as informed as possible without paying
: for extra stuff. I of course would like your expereince with a Softub
: to be the best it can be.

: On the P27 Motor. Dont get one. Stick with your P26.

: Russ.
: 1300Spahire.com

Hi Russ, Tubguy here. I thought this thread was dead. It should be. As The Senior Softub Tech for the largest dealer in Ontario, I'd like a bit more information on you. what do you know and how many decades have you been in th Pool and Spa landscape? I bet John (nloty) is wondering as well) Best Regards, Tubguy